danos drainfield

Table of Contents

A Proper Guide on Maintenance process of Septic Tanks

The increasing usage of septic tanks in rural and urban regions indicates that there is an unending demand for efficient maintenance strategies for septic tanks. Due to the high cost of replacing a septic tank, attention must be placed on cost-effective solutions. Additionally, the conventional method of mechanical pumping isn’t cost-effective either.

Chemical products used for treating septic tank waste are not recommended as they could cause significant damage to the environment. So, it is important to be aware of what substances you’re putting into the drain. 

Additionally, the proper maintenance of your septic tank is essential to avoid pumping repairs and keep your tank running smoothly. For more details on successful cleaning and septic pumping, Bremerton, Keep reading!


Maintenance Process for Septic Tanks


1. Inspect and Clean the Pump regularly

In order to keep your septic tank pumping, either Aerobic or Anaerobic, the system must be inspected. Inspections should occur every 1-3 years, and the system should be pumped every 3 to 5 years. Furthermore, certain systems come with float switches, and other inspections and devices have to be performed every year. Each state has its own rules; therefore, consult with an expert for the recommended procedures.

The size of your home and the amount of wastewater produced, the number of solids in the waste, and the tank’s size determine how often maintenance is required. Failure to remove the water could cause water to back up into your home, so it is important to get this completed also.

2. Check the drail field for clogs

Although you can limit the amount of solid waste and water from your home and check regularly and pump the tank for septic, the leach field may be blocked. This is especially the case during wet or stormy weather because the excess water may cause the septic system to overflow, increasing the amount of solid waste pumped to the leaching field.

Flooding can also happen when a significant amount of snow melts over a period of time, so it is recommended to have septic inspections for the leach field in rainy or humid weather to look for smells of sewage or particularly the lush and fast-growing grass that might indicate that the drain field has become blocked. Other indicators of a clogged leach field include slow-running drainage or backed-up plumbing. Also, you may notice waterlogged ground and standing water.


3. Water Efficiency in the Home

Based on your Bremerton, WA house, you may have toilets that excel in conserving water or using it. How much is enough? A high-efficiency toilet consumes 1.6 Gallons of water for each flush, compared to older toilets that consume only 3-5 Gallons! This is part of the septic system. For washing clothes, it’s best to wash all the clothes in one go.

Furthermore, we are “weekend warriors” when it comes to washing clothes and are eager to get everything done in one go. But, this is not the best idea with the septic system because it needs time to get rid of the wastewater and drain it into the ground and not come back up. Backups and septic systems repairs can be expensive.


4. Use a Bacteria Additive

The waste generated from home isn’t left to be able to sit inside the tank, only to accumulate until it must be cleaned. It is cleansed by weight which allows the solids to sink to the bottom of the tank and then release the liquid waste into the leach field to be cleaned through the earth. The remaining waste in the tank gets reduced by the bacteria that help keep the septic system good health and functioning.


5. Ensure to flush only Human waste and toilet paper

Have you ever been in an office restroom and noticed a sign that reads, “Don’t flush paper towels, feminine products, or wipes in the toilets?” These products don’t dissolve and can create a mess in the system.

There is no need to place the bathroom sign up but ensure that there’s a trash bin that people can use to throw out these waste items instead. Maintaining your system by keeping anything other than toilet paper and human waste away from your septic can ensure it will last for years to come.


6. Keep maintenance records

Whatever the nature of the maintenance done to this system, it’s essential to maintain precise records of your septic tank services and their results. This information can determine the amount and frequency you’re putting any bacteria-related substances into your system. 

Based on prior data, any results from an inspection that fall out of the normal requirements for your system can help identify any issues before they become too big of a concern to deal with.


If your septic tank pumping Bremerton fails and breaks, you must call an expert from Dano’s Septic to inspect your system immediately. With years of experience in the field, the issue with your tank will be detected, assessed, and treated in no time- ensuring you get the best septic services in Washington state.


Recent Post